Electrical ratings
Operating voltage, AC/DC suitability, frequency, short-circuit rating and protective-device coordination.
← All products
TRACK BUSWAY
Aperium Glide
100-1250 A | Catalog family range
Air-insulated track busway with a continuous access slot for tap-off placement along the run. A flexible distribution approach for IT equipment and evolving rack-row layouts.
Technical selection
Specifications at a glance.
Explore available ratings and configuration options. Final specifications depend on your selected configuration.
| Busway family | Air-insulated track busway |
|---|---|
| Catalog current range | 100-1250 A |
| Housing groups | 100-400 A; 630 A; 800 A; 1000-1250 A |
| Tap-off positioning | Continuous access slot along the bus run |
| Tap-off current examples | 63 A and 125 A three-phase; 250 A current class |
| Output arrangements | Single- and three-phase options; cable-drop and receptacle variants |
| Monitoring points | Voltage, current, power, energy, harmonics, temperature and switch status; module-dependent |
| Communications | Network / RS485 architecture shown; wired or wireless options |
| Feed-in options | With or without incoming switch and surge protection, according to configuration |
Before you specify
Mechanical & site
Dimensioned drawings, tap-off spacing, cable entries, support spacing, IP rating and environmental limits.
Documentation
Selected-assembly certification evidence, test records, installation instructions and approved bill of materials.
Designed for applicable UL requirements
Products are designed to meet applicable UL requirements, with certification arranged for the selected project configuration. Custom electrical ratings or design changes may require additional evaluation, testing or a new certification scope.
Planning timeline: approximately 3 months. This project estimate starts once the configuration, documentation and test samples are ready. Final scope, timing and certification are subject to UL review and successful testing.
Product & component details
See the hardware.
Explore the equipment, components and assembly details.
Product focus
Power where
the layout needs it.
Continuous access
Tap-off units connect along the continuous slot, allowing the connection layout to follow the rack arrangement.
Tap-off choices
Catalog options include 63 A and 125 A three-phase tap-offs and a 250 A current class. Output arrangements depend on the selected unit.
Electrical visibility
Monitoring options cover electrical measurements, temperature and switch status at the feed and tap-off units.
Application fit
Where this product fits.
Expand an existing data center ↗Flexible tap-off locations where the rack layout is changing.Fit out the next colocation phase ↗Tap-off placement that follows the tenant rack plan.Introduce high-density AI / HPC racks ↗Row-level distribution with project-selected tap-off units.Build out a data hall in phases ↗Row-level tap-off distribution as rack layouts develop.
Project requirements
Define the
configuration.
- Bus current, voltage and available fault current
- Rack layout and required tap-off locations
- Outgoing circuits, connectors and protection
- Monitoring points and communications interface
Catalog family range only. Final voltage, frequency, fault rating, configuration and certification coverage require confirmation.
Build your project brief ↗